BGXWG - DYNABOND SYSTEM 2 PART B

  • MSDS: BGXWG
  • Manufacturer: AMERICAN CHEMICAL CORP
  • Product Name: DYNABOND SYSTEM 2 PART B
  • National Stock Number: 8010-00N010169
Product Identification

Product ID:DYNABOND SYSTEM 2 PART B
MSDS Date:11/25/1985
FSC:8010
NIIN:00N010169
MSDS Number: BGXWG

Responsible Party
AMERICAN CHEMICAL CORP
35555 CURTIS BLVD
EAST LAKE, OH 44094

Emergency Phone: 215-943-7600

Info Phone: 215-943-7600

Preparer: JAL KHAMBATTA

Cage: OBTX0

Contractor
AMERICAN CHEMICAL CORP
EAST LAKE, OH 44094

Telephone: 215-943-7600

Cage: OBTX0

Ingredients

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 13%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 13%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:THIS PRODUCT MAY BE AN EYE
IRRITANT.SKIN:THIS PRODUCT MAY CAUSE SKIN IRRITATION.INGESTION:N/K
.INHALATION:N/K .
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:FLUSH W/ LRG AMT OF WATER FOR AT LEAST 15 MIN & SEEK
IMMED MED ATTN.SKIN:WASH THOROUGHLY W/ SOAP & LRG AMT OF H2*O.GET
MED ATTN IF IRRIT PERSISTS.INHAL:MOVE TO FRESH AIR IF DIZZY OR
LIGHTHEADED.I F BREATHING IS DIFFICULT,GIVE OXYGEN UNTIL MED HELP
CAN BE RENDERED.IF BREATHING STOPS,GIVE ARTIF RESP.GET IMMED MED
ATTN.INGEST:IF SWALLOWED,DO NOT INDUCE VOMITING.SEEK IMMED MED
ADVICE &/OR ATTN.

Fire Fighting

Extinguishing Media:PRODUCT WILL NOT BURN UNTIL WATER EVAPORATES.THEN
USE WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE-WATER BASED MATERIAL.HAZARDOUS
DECOMPOSITION PRODUCTS:CARBON MONOXIDE AND/OR CARBON DIOXIDE,AND
OXIDES OF NITROGEN.

Accidental Release

Spill Release Procedures:DIKE AND CONTAIN SPILL WITH INERT
MATERIAL.SCRAPE INTO CONTAINER FOR DISPOSAL.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:N/K
Other Precautions:N/K

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GENERAL MECHANICAL VENTILATION IS SUFFICIENT.
Protective Gloves:WEAR IMPERMEABLE GLOVES.
Eye Protection:CHEM WORK GOGG,FACESHLD OPTIONAL .
Other Protective Equipment:EYE WASHES AND SAFETY SHOWERS ARE
RECOMMENDED.IMPERMEABLE APRONS ARE ADVISED WHEN WORKING WITH THIS
PRODUCT.
Work Hygienic Practices:N/K
Supplemental Safety and Health
N/K

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Spec Gravity:>1 (WATER=1)
Evaporation Rate & Reference:1 (WATER=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:PAINT-LIKE MATERIAL WITH SLIGHT AMMONIA ODOR.
Percent Volatiles by Volume:30

Stability

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE WITH STRONG ACIDS.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND/OR CARBON DIOXIDE,AND OXIDES
OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .BURY IN LANDFILL WHERE
PERMITTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.